Login to the Secure Zone

Downloads

Range Brochures

Software Downloads

Please note: when downloading a newer version of our software please ensure you remove the old version first.

Easidew 2-Wire Configuration Software

* This software allows the user to configure the output range and units of the Easidew Transmitter. To enable connection between PC and Easidew Transmitter the Easidew Communications Kit (Part No. EA2-CK) is required. Please contact Michell Instruments to purchase the Communication Kit.

Download Easidew 2-Wire software (requires Win 1998, 2000 or XP, for older systems see Windows update). Ram: Minimum of 64 MB. Hard disk: Minimum 10 MB. Hardware: 1 x RS232 port (If an RS232 port is not available, then USB to RS232 converters can be used on USB ports).

Easidew (3-Wire) Transmitter Application Software

Download Easidew software (requires Win 2000 or XP, for older systems see Windows update). To fully utilise this software, ensure that a K2 ADE Interface Converter, RS232-RS422/485, non-isolated is used (Michell Part No. 35034).

Opti-Soft Data Acquisition Software

Download Optidew software (requires Win 2000 or XP, for older systems see Windows update).

PURA Transmitter Application Software

Download PURA software (requires Win 2000 or XP, for older systems see Windows update)

Humidity calculator

This comprehensive humidity calculation programme allows you to convert from dewpoint or relative humidity to a wide range of humidity related parameters, with pressure conversion and enhancement factors.


Download the Humidity Calculator
(requires Win 2000 or XP, for older systems see Windows update).

Windows update

The Easidew, Opti-Soft and Humidity Calculator applications all use the latest Microsoft® Installation technology (Windows Installer) as the install engine. Unlike Windows 2000 and XP, Windows 95, 98 and ME do not support this technology as standard therefore if you are running one of these operating systems it is likely you will need to upgrade your system with the Windows Installer service pack.

To upgrade your system, you can click on the link below this paragraph. This will initialise installation of the Windows Installer service pack. Follow the on screen instructions and re-boot your system on completion. Your operating system will then be equipped with the Microsoft® Installer V2.0 and you will be able to install the Easidew, Optidew and Humidity Calculator applications.

Install Windows Installer Service Pack

Dewmet Logging Software

This data acquisition software allows dewpoint, temperature and relative humidity data from our Dewmet TDH Cooled Mirror Dewpointmeter to be logged directly on to a PC in a WindowsT environment via an RS232 inter-connecting cable. Logged data can either be charted on-line or stored numerically for processing in a spreadsheet.


Download the Dewmet Logging Software

This program will be downloaded as a self extracting zip file and will be saved to a temporary location on your hard drive. From there, double click the zip file to open and follow the set-up procedure. Please note: this software will not work on Windows 2000 or XP.

Transmet Logging Software

The Transmet Dewpoint Transmitter, in digital mode, can be linked directly into a PC, to provide on-screen display, charting or numerical acquisition of dewpoint and temperature data. The software allows data to be collected and displayed from up to 32 Transmets simultaneously, using RS485 communications protocol.


Download the Transmet Logging Software

This program will be downloaded as a self extracting zip file and will be saved to a temporary location on your hard drive. From there, double click the zip file to open and follow the set-up procedure. Please note: this software will not work on Windows 2000 or XP.

 Michell Instruments cannot accept any responsibility for any loss, disruption or damage to your data or your computer system, which may occur if you use any of the programs or data on this page.

Web design by Studio 24